how do i test my raid 0 setup

How Do I test my RAID-0 setup ??
location: 7forums.com - date: August 20, 2010
Hello there. I am on the tail end of building my system. It has been quite and experience so far. After an already successful first build, the computer is OC at 3.9 ghz stable but then I felt the urge to upgrade my sole 1TB hard drive ( 32 MB Cache /3 mbs ) into a RAID 0 configuration, using 2 brand new WD 1TB hard drive, 64 MB Cache / 6 mbs, which my Asus supports. I am assuming that this will seriously improve speed and performance. After hell trying to figure out the RAID setup in BIOS and a clean install of Windows 7 64 bit, I finally got it to work. The computer is now operational. But there is only concern I have... I can't tell any MAJOR improvement ! A slight improvement in speed when I change windows and programs is
video help | post reply | read more

In a Raid 0 setup using NVIDIA software raid, does the second drive get to partition with the boot info. And what would I have to do to change it to a Raid 0+1?
location: microsoft.com - date: January 30, 2011
Original Title: NVIDIA Software Raid 0 or Raid 0+1?____In a Raid 0 setup using NVIDIA software raid, does the second drive get to partition with the boot info. And what would I have to do to change it to a Raid 0+1? Whats the advantage with 0+1?________ In a Raid 0 setup using NVIDIA software raid, does the second drive get to partition with the boot info. And what would I have to do to change it to a Raid 0+1? Whats the advantage with 0+1? win 7 64 bit nvidia nf980-g65 mb ATI HD5770 8gb Patriot DDR3 Ram AMD Phenon II x 4 965 blk 3.4Mhz OC'ed to 4.0Mhz (water cooled) 2 WD 1TB HHD's (1 Samsung 80GB HHD for backups) SIIG 7.2 surround sound card Plextor Blu-ray Burner/player Samsung 50in LCD
video help | post reply | read more

How do I stop XP Professional setup from continuously restarting?
location: microsoft.com - date: November 13, 2012
I am attempting to upgrade from XP Home to XP Pro on an Asus Aspire One netbook. Setup got through the initialize and copy phases with no problems. Just when setup is about to finish, I get a dialog box complaining that my printer (HP LaserJet 6P PCL) did not pass Windows Logo testing and asked me if I wanted to continue the installation. Setup loop restarts no matter what answer I give. I am doing the upgrade from a USB stick. And yes, I know I don't get a performance boost by moving from Home to Pro but I need to join a domain at work so that's why I'm upgrading. Many thanks for your help. All the best, Bill
video help | post reply | read more

SSD Raid-0 setup
location: 7forums.com - date: February 25, 2010
Hey everyone, can you help me out please? I am thinking of buying SSD disks and maybe into a raid-0 config with 2 disks (thinking of these OCZ 30 GB OCZ OCZSSD2-1VTXT30G). My MB (Asus M4N-72E) should support RAID, but does it work with SSD? Or do I need a special adapter? Thnx for your replies! Grtz Wolfert
video help | post reply | read more

Win 7 raid 0 setup / missing raid controller driver
location: 7forums.com - date: November 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. did i do something wrong? using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
video help | post reply | read more

One SSD + 2 HDD in Raid 0 setup
location: 7forums.com - date: June 7, 2012
Hello users, My mobo is a Asus P6T deluxe v2. I got one OCZ Agility 3 120gb SSD for OS, and I want my two other HDD Hitachi 500 GB in Raid 0. Is that possible? If it is possible, how?
video help | post reply | read more

Windows 8 and Raid 1; trying for Windows 8 to recognize my RAID 1 setup.
location: microsoft.com - date: September 7, 2012
Hi, I am trying for Windows 8 to recognize my RAID 1 setup. I am using a ASUS Rampage IV Extreme and setup two RAID 1 Arrays containing each two 4TB hard drives. (16TB total). In BIOS I set the SATA Mode to "Raid Mode" and used the Intel Rapid Storage Technology Option (accessed during booting with CTLR + I) to set up the two RAID Volumes. So far so good. I have a fifth SSD hard drive where I'm planning to installing the Windows 8. During the install Windows does not recognize both RAID 1 arrays (It does recognize all 5 disks but not the 2 predefined arrays). I choose the SSD drive to proceed with the install. Not surprisingly after Windows 8 is installed it still does not recognize the arrays and they do not show up in the
video help | post reply | read more

How do I disable Wifi Protected Setup?
location: winsecrets.com - date: June 11, 2013
After reading a Brian Krebs security article, I wanted to disable Wifi Protected Setup on my Linksys 2000. I've looked at all the options available on my router and can't see how to do that. Can some kind soul help me out here? Thank you, Dick
video help | post reply | read more

How do I setup my Xbox 360 as an extender?
location: microsoft.com - date: August 25, 2009
How do I setup my Xbox 360 as an extender?
video help | post reply | read more

My default gateway is 0.0.0.0 how do i change my default gateway
location: 7forums.com - date: June 26, 2011
to forward a port i typed my default gateway in the browser then i got this pageIP Address Lookup - Home page at the top right corner there was a login field wherei tried to login without having an account i tried .I tried five times and each time i failed.after five times the webpage banned me for fifteen minutes from then my default gateway is 0.0.0.0. this is my ip config Code:
video help | post reply | read more